The tree in my garden grew big. It is higher than the roof.
I am pleased with growth. Cut the branches with scissors. This is a level that does not pass. Cut with a saw. This is the best.
Cut with a manual saw. The labor of cutting the raw trees is great. It is several times as much effort as cutting labor. It is too fat to cut with a saw. I use a chain saw.
Chainsaw makes a great noise and the teeth rotate. I had doubts as to whether I could handle it as an amateur.
However. I needed to cut branches 10 cm in diameter. I decided to challenge.
I will introduce the chain saw that I purchased.
size. The part of the tooth is 25 cm. It is about the same as the saw I have.
Another chain saw has long teeth. I considered. The length of the tooth is about twice the diameter of the branch.
What to prepare before cutting. There are three of them.
The first one is a table tap. This chain saw is not rechargeable but requires a power supply.
My garden needs 5 meters.
The second one is a glove.
Good ones with nonslip are good.
The reason is that you can grasp the chain saw firmly.
The third one is glasses to protect your eyes.
Chips are flying when cutting. It could hurt the eyes. I need protecting my eyes.
I put oil in the chain saw. Chien oil is attached.
Open the filler neck and pour the oil.
Since oil inspection windows are attached, you can enter the upper limit of the window.
Caution. Overflowing the upper limit of the window overflows.
I will not do overflowing. Because. Chain saw becomes sticky and cleaning is difficult.
Putting in the chain oil was completed. Close the filler neck firmly.
I have practiced. Electricity is cut off. I gripped the square hand with my left hand. I grabbed the hand holding the trigger with my right hand.
I grabbed the trigger while holding down the safety lock button.
I understood how to hold.
I turned on the lights.
I pressed the switch trigger while holding down the safety lock button.
I confirmed that the teeth spun and the oil splashed from the tip of the blade.
I released the switch trigger.
I confirmed that my teeth had stopped.
I understood how to use it. I start logging.
I hit my teeth where I wanted to cut.
continue. I grabbed the trigger while holding down the safety lock button.
The teeth turned and began to cut.
point. Cut about 1/3 from the bottom side of the branch. next. Cut from the upper side. This order is important. Teeth are caught only on the upper side.
I could cut it in a short time.
I am easy to cut thick branches.
The reason is that the branch does not move.
A thin branch moves when it cuts. It does not cut when it moves.
I took care. Branches will come back.
Chainsaws are easy to stabilize. The place which the right hand holds. The place which the left hand holds. Because it is decided. It is easy to hold with both hands. It is easy to stabilize.
It weighs 2.1 kg and is light. I could do the work smoothly.
Adapt to the size of the sound. Women can handle it.
This chain saw is useful for planting trees.
Chainsaw is here.